UV Light Meter
The Model 221 is the calibration tool for both the Stratasys(Objet) 3D printers and the 3d Systems printers“
Measurements are selectable in mw/cm2 or mj/cm2
- Intensity: Range scale – .01 to 199.99 mw/cm2 and 1 to 1,999 mw/cm2
- Energy: Range scale – .01 to 199.99 mj/cm2 and 1 to 1,999 mj/cm2
- Energy Settings: Selectable – Single pulse or Accumulated.
The probe wavelength
- UV: 365nm
Light Meter Specifications
Switch Functions:
- Power-On
- mw/cm2, nj/cm2
- 200, 2,000
Display: LCD 4,5 digit with low battery.
Range:
- mw/cm2: .01 to 199.99 mw/cm2 and 1 to 1,999 mw/cm2
- mj/cm2: .01 to 199.99 mj/cm2 and 1 to 1,999 mj/cm2
NIST Traceability: ±3.0%
Calibrations:
- Each range scale is linear to <1%
- Instrument to Instrument calibration error is <1%
- Probes are calibrated to +/- 1% to each other at the same wavelength and are interchangeable
- With all new calibrations a Calibration Certificate is included
Power: One standard 9-volt battery.
Meter Dimensions:
- 6.0 in. × 2.75 in. × 1.13 in.
- Aluminum casing and comes in carrying case
Meets all the requirements of IEC, UL, and CSA.
