Model 222

UV Light Meter

“Autodesk 3d Printer –  The Model 222 is the measurement and calibration UV light meter used for the Autodesk 3D Printer.

Measurements are selectable between mw/cm2 or mj/cm2. In the mj/cm2 mode, the measurement displays total accumulated mj/cm2.

• Intensity: Range scale – 1.00 to 199.99 mw/cm2
• Energy: Range scale – 1.00 to 199.99 mj/cm2 Accumulated

The probe wavelength

• UV: 405nm (405nm designation specified by Autodesk; however, actual is 410nm)
• UV: 385nm is also available and must be specified

Switch Functions:

• Power-On
• MW/CM2, MJ/CM2
• Reset

Display: LCD 4.5 digit with low battery.
 
Range:

• MW/CM2: 1 to 199.99 MW/CM2
• MJ/CM2: 1 to 199.99 MJ/CM2

NIST Traceability: ±3.0%

Calibrations:

• Each range scale is linear to <1%
• Instrument to Instrument calibration error is <1%
• Probes are calibrated to +/- 1% to each other at the same wavelength and are interchangeable
• With all new calibrations a Calibration Certificate is included

Power: One standard 9-volt battery.

Meter Dimensions:

• 6.0 in. × 2.95 in. × 1.28 in.
• Aluminum casing and comes in Pelican case

 

 

Meets all the requirements of IEC, UL, and CSA.